Engels

Slide Curtain System: Installation Guide via the App

Download the Slide app via the buttons below:

Installing a New Slide

Welcome to the installation guide for the Slide curtain system. This document explains step-by-step how to install Slide using the app. Note: this guide only covers the app installation.

Step 1: Choose account option

When opening the app, you'll see three options:

·       Inloggen met een bestaand account (Log in with an existing account)

·       Een nieuw account aanmaken (Create a new account)

·       Offline gebruiken (Use offline)

Important: If you choose to work offline, you won't be able to connect your Slide to services like Google Home. In most cases, you can proceed without creating an account.

If you forgot your password, you can request a reset in this step.

Step 2: Add your Slide

After selecting one of the options in step 1, you'll land on the main menu where all connected Slides are shown. If you haven’t installed one yet, tap 'Installeer nieuwe Slide' (Install new Slide).

Step 3: Choose installation method

You now have two options:

·       Slide is al verbonden met Wifi (Slide is already connected to WiFi) – only use this if you're sure the Slide is already set up on your WiFi

·       Volledige installatie (Full installation) – recommended in most situations

Step 4: Select curtain type

Specify what type of curtain you’re using. If you're using a curtain rod (roede), you'll need the Roedebeugel (Rod Mount), available here:
https://www.robbshop.nl/slide-beugel-voor-roedesysteem

Also select the curtain layout – this is essential for correct calibration.

Step 5: Physical installation

You’ll now enter the Slide "setup room" in the app. A video explains how to install Slide physically. If you’ve already mounted it, choose 'Installatie voltooid' (Installation completed).

Step 6: Connect Slide to WiFi

The app now begins the WiFi setup.

Step 7: Check LED indicator

Confirm the LED on the Slide is slowly pulsing. If not:

·       Press and hold the lower button on the Slide for 10 seconds to reset.

Step 8: Connect to Slide network

Connect your phone to the Slide’s WiFi network (Slide_xxxxxxxxx).

Then return to the Slide app and tap 'Verbinden' (Connect).

Step 9: Enter WiFi credentials

You're now connected to the Slide. Enter your home WiFi credentials and tap 'Verbind Slide' (Connect Slide).

Make sure the password is correct — otherwise, the connection will fail.

Step 10: Connecting to home network

A loading screen appears while Slide connects to your WiFi.

Step 11: Check LED again

Check if the LED on the Slide has turned off. If it hasn’t:

·       Press and hold the reset button on the bottom for 10 seconds

·       Go back to Step 8 and reconnect to the Slide network

Step 12: Connect to server

The app connects to the Slide server to check for updates. Tap 'Uitgebreid' (Advanced) to proceed.

Step 13: Search for Slide

Tap 'Starten' (Start) to let the app search for the Slide on the network.

Step 14: Perform firmware update

Slide will now install updates. At the end, the screen should look like the example below.

Important: The app will instruct you to unplug the Slide. This is necessary for Slide to work correctly.

Step 15: Start calibration

Begin calibrating the Slide.

Do you get a network error?

·       Unplug the Slide from power for 1 minute

·       Try again

·       Still issues? Send a screenshot similar to step 14 to our support team via robbshop.nl

Step 16: Complete calibration

If the curtains have opened and closed completely, calibration is successful.

Tap 'Het is klaar, start het testen' (It’s done, start testing).

If it didn’t work:

·       Retry

·       Increase the motor strength if Slide can’t move the curtains fully

At any time you can tap 'Stop handmatig' (Stop manually) to stop the calibration.

Step 17: Test calibration

The Slide now runs a test. If successful, tap 'Opslaan en doorgaan' (Save and continue).

If not, choose one of the other options depending on the situation.

Step 18: Finalize installation

Add your Slide to the main menu:

·       Select a zone

·       Name your Slide

·       Tap 'Je bent klaar. Let’s Slide!' (You’re done. Let’s Slide!) or choose 'Nog een Slide installeren' (Install another Slide) if you have more units.