Most people install Slide in less than 15 minutes. You don't even need a screwdriver to set it up. Learn more about this by checking the Installation Flow.
How to set up Slide on curtain rails
Start by getting the Slide App from the Android Play Store or iOS App Store
The app will guide you trough the installation. Everything else you need is in the box.
Place the Slide Mount on both ends of your curtain track
The Slide Mount locks itself to the existing runners and stoppers in your curtain track. The placement can be adjusted to fit your specific system.
Snap Slide in into the mount
The modular mounting system ensures a robust seal between your rails, the mount and Slide. No tools, screwing or drilling required.
Snap the pulley into the opposite mount
The pulley is attached to Slide when you unbox it. By pulling it to the opposite end of your curtain track, the Slide Cable automatically rolls out.
Connect your runners to the Slide Connector
Connect two runners on the inner end of your curtain to the Slide Connector with the clip. If you have a double curtain, repeat on the inner end of your second curtain.
Re-attach the curtain hooks you disconnected for installation
You can hook them them directly to the mounting system. This ensures that Slide is fully hidden behind your curtains after installation.
Plug the power adapter into Slide and your outlet
Slide comes with a five meter long cable that falls behind your curtain, out of sight. The power adapter is plugged into any mains outlet.
Complete your onboarding and get started with the Slide App
The Slide App connects Slide to your home WiFi network. It will also automatically calibrate the system for your curtains, so you're ready to Slide!